Double Surface Planer with Multiple Rip Saw
Perfectly suited for producing square wood in material preparation factories and sawmills.
Combines the functions of a planer and a multiple rip saw, saving time and labor.
- Patented top and bottom self-aligning feed rollers ensure smoother feeding
- Patented top and bottom knife replacement
- Patented saw arbor design eliminates the need to dismantle bearings, making saw blade changing easier
- Extremely high precision saw arbor
- Faster rubber roller replacement.
|
 |
 |
INNOVATIVE CUTTERHEAD REMOVAL DESIGN
When replacing the knives,the cutterhead can be easily removed by pulling it out directly without having to dismantle the bell , dust hood or bearings. |
 |
PREFECT SPEED CORRELATION OF TOP AND BOTTOM ROLLERS
Eliminates the conventional chain drive,the machine employs universal shafts for transmission with synchronized feed speed between upper and lower feed rollers.The outstanding transmission system may effectively solve the reeding problem for moisturized wood during heavy duty cutting. |
 |
A IR LOADED PRESSURE TOLLERS
Air loaded pressure rollers ensure a smooth feed. |
 |
FAST SAWBLADE REPLACEMENT
The sawblade can be easily replaced by simply loosening a screw and without having dismantle and of bearings. The side arbor ensures added convenience for saw blade replacement and calibration. |
 |
FAST SECTIONAL RUBBER ROLLER REPLACEMENT
The sectional outfeed rubber rollers can be easily replaced in the event of wear. Once the holding bearing is dismantled, the rollers can be easily removed from the front. |
 |
PRECISION ELEVATION OF FEEDING MACHANISM
The feeding mechanism elevation is digitally control, It can be power operated for accurate, clear and easy adjustment. |
Max. width of planning |
650mm |
Max, ripping of planning |
630mm |
Thickness of cut |
12-150mm |
Min.length of cut |
420mm |
Bottom spindle speed |
5300 RPM |
Top spindle speed |
5300 RPM |
Saw spindle speed |
2600 RPM |
Sawblade diameter (Cut thickness) |
Ø355(12-100) Ø405(12-120) Ø455(12-150)MM |
Saw spindle diameter |
Ø 65MM |
Sleeve diameter ( Sawblade bore diameter) |
Ø 80MM |
Sawblade keyway |
20 MM(W) X2 |
Sawblade between keyways |
90MM |
Spacing collar diameter (i.D./OD.) |
Ø 80MM/100MM |
Feed speed(Variable) |
7-28 M/MIN |
Bottom spindle drive motor |
20 HP (30 HP, 40 HP, opt) |
Top Spindle drive motor |
30 HP (30 HP, 50 HP, opt) |
Saw spindle motor |
50 HP (75 HP, 100 HP, opt) |
Feed drive motor |
5 HP |
Pressure roll elevation motor |
2 HP |
Saw elevations motor |
1/2 HP |
Dust hood outlet diameter |
Ø125mm(5”)x2, Ø150mm(6”)x4 |
Table height from floor |
800mm |
Machine size (LxWxH) |
3800 x 1800 x 1800mm |
Packing size (LxWxH) |
4020 x 2200 x 2250mm |
Net weight |
(Approx) 4200 kgs |
Gross weight |
(Approx) 4600 kgs |